Green Energy

With energy accounting for approximately one quarter of Resolute's paper production costs, we are always exploring ways to enhance our overall energy efficiency. The energy used in pulp and paper production comes primarily from steam and electrical power. Resolute generates power from its seven hydroelectric and six cogeneration facilities, and purchases electricity and fuel from external suppliers.

In addition to our internal continuous improvement process, the company reports greenhouse gas (GHG) emissions according to the Greenhouse Gas Protocol and follows the requirements of the U.S. Environmental Protection Agency, the Quebec Ministry of Sustainable Development, Environment and the Fight against Climate Change, the Ontario Ministry of the Environment and Climate Change, and Environment and Climate Change Canada, depending on the jurisdiction in which our facilities are located.

Energy-use projects and other projects that have an impact on energy consumption are linked with Resolute’s carbon management activities and consequently are managed through the organizational structures and procedures described on the Climate Change and Energy page. Data collected at the mill level is aggregated and verified by third parties, including GHG emissions.

Optimizing the use of renewable energy sources such as hydroelectricity and carbon-neutral biomass, while reducing consumption of fossil fuels, is a key element of our strategy to improve our carbon footprint. In 2020, Resolute generated three quarters of its total energy needs (18,825 GWh) from renewable sources, such as hydroelectricity and biomass.

Going 100% Coal-Free and Using Less Carbon-Intensive Fuels

Replacing high-emission fuels like coal with less-carbon-intensive fuels benefits both the environment and our bottom line. In 2014, for example, we replaced the remaining coal used at our operations with natural gas, a less-carbon-intensive fuel, in order to become scope 1 coal-free as of April 2014. We also reduced bunker C oil use at our Clermont, Dolbeau and Saint-Félicien mills in Quebec, and initiatives are currently underway at several facilities to reduce the use of natural gas and to promote biomass or electricity utilization.

In 2020, 75% of our fuel energy usage (14,651 GWh) was derived from biomass.1 By utilizing bark, wood residues and biosolids for energy instead of sending these waste products to landfills, Resolute is able to reduce consumption of fossil fuels, as well as the GHG emissions associated with their use.

A small portion of our fuel energy is sourced from other alternative energy fuels, primarily used tires, which diverts these materials from landfills and recovers the energy value.

Fuel Energy and Electricity Consumption

Fuel Energy and Electricity Consumption
  2018 2019 2020
Fuel energy used (TJ) 70,511 70,686 70,358
Electricity used      
Purchased electricity (GWh) 7,375 6,680 4,673
Self-generated electricity (GWh) 2,850 2,709 2,815
Renewable energy as a % of total energy
(including purchased electricity)
74 75 75

graphs of the types of fuel used to produce steam at our pulp and paper mills

Using and Producing Electricity

graphs of the different sources of electricity at our pulp and paper mills

We see rising energy costs and power supply disruptions as risks that must be managed. For this reason, we are focusing on improving the energy efficiency of our mills and maximizing internal cogeneration of heat and power from renewable sources.

Overall, Resolute produces the equivalent of over 44% of its electricity needs internally (owned and self-generated), mostly from renewable sources. The remainder is purchased from third parties. In 2020, the combined amount of purchased and self-generated electricity we used in our pulp and paper mills totaled 6,341 GWh.

We produce electricity at seven hydroelectric dams and six cogeneration facilities. Cogeneration refers to the simultaneous generation of electricity and steam, which allows us to extract more energy from a given amount of fuel.

Continuous Improvement

We are constantly evaluating and improving our manufacturing processes to optimize energy efficiency and reduce our consumption of fuel, steam and electricity. This, in turn, reduces our scope 1 and 2 GHG emissions and helps to improve our cost structure and competitive position.

Our climate change mitigation efforts received extensive recognition in 2019. Among the many accolades, the AF&PA recognized the company with a Leadership in Sustainability Award in the Energy Efficiency/Greenhouse Gas Reduction category (Large Company), while Canada’s 2020 Clean50 and 2020 Clean16 honored our former President and Chief Executive Officer, Yves Laflamme, for his contribution to sustainability and clean capitalism in Canada.

Going forward, we will continue to focus on renewable energy sources by increasing the use of biomass and optimizing our cogeneration business, among other advances.

1 Does not include wood products. Includes bark and biosolids from our water treatment plants, as well as black liquor.